TK Audio M/S Blender 500

The new TK Audio M/S Blender 500 is a multi functional parallel processing tool. A dual mono blender, a stereo blender and a M/S encoder/decoder in one.

 694,66

Available on backorder

Category:

 

The new TK Audio M/S Blender 500 is a multi functional parallel processing tool. A dual mono blender, a stereo blender and a M/S en- coder/decoder. In standard mode the unit acts like two individual mono blenders. If you activate the link function the left blend knob will control both channels for easier blend of stereo signals. In M/S mode the left/right sends will be encoded into mid/ side sends and the returns will be decoded back to left/right before the blend control(s). A cue function is also provided so that you can monitor the left, right, mid or side signal (to cue the mid or side signal the M/S function need to be activated.) The cued signal will be sent to both main outputs. All inputs and outputs are electronically balanced and can handle signals up to +26dBu.

 

Parallel processing

Parallel processing can help you get more energy on tracks like bass, vocal and guitars by blending in compression. You can also give it more punch in a mix by blending in a compressed signal. With parallel compression you will keep the transients from the direct signal while you blend in compressed signal for more energy. It’s also very useful for blending in signals from distortion, saturation and overdrive units. The M/S Blender 500 can also be used as a M/S encoder/decoder for the inserted processor(s), you don’t need to use stereo units for M/S processing, you can use separate units for mid and side processing. When you work in M/S mode the mid and side signal will be processed separately which can help you get a more focused mid, adding some air to the sides at the same time. By altering the side signal level you can control the width of the mix.
In M/S mode Mid and Side can not be blended separately so the link function should be activated to avoid level miss match.

 

Features of the TK Audio M/S Blender 500:

  • Blend controls: from dry to wet in 41 steps
  • In L/S and In R/M: activates respective channels
  • Link: Left/Mid channel In switch and Blend knob controls both channels
  • Cue sw:
    L/M and R/S Out XLR: balanced send jacks
    L/M and R/S In XLR: balanced return jacks

Specifications and components may be changed or updated without further notice.

 

Don’t forget to take a look at our other TK Audio products!

Visit the TK Audio website for more info.

Power requirement:

+130 / -60mA

Frequency response:

20Hz-80kHz +/-0dB

THD+N @ 1kHz:

less than 0,0006% (M/S)

Dynamic headroom:

124dB (119dB M/S)

Signal to noise ratio:

97dB @ 0dBu

Signal to noise ratio with M/S activated:

92dB @ 0dBu

Input impedance:

24kohm

Output impedance:

70ohm

Max input level:

+26dBu

Max output level:

+26dBu

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.