Avantone CLA-200

The Avantone Pro CLA Studio Reference Amplifiers are a classically designed Class A/B amplifier.

We took particular care to create an amplifier in the traditional studio style, with generous VU meters, high quality Japanese components and a serious toroidal transformer linear power supply. These amplifiers can generate over 800 watts per channel into an 8 ohm load, making it perfect for medium to large speakers in a studio environment. The CLA’s are convection cooled – no fan noise, so it can be used in the same room as the monitors

 571,20 990,00

SKU: N/A Category:

CLA-100

200 WATTS OF STUDIO-GRADE POWER.

The newest addition to the CLA family of products, the 100WRMS per channel CLA-100 is a robust, convection only cooled, 1U rack mounted amplifier with the classic sound of hifi and studio class AB systems. Similar to its more powerful brother, the CLA-100 is powered with an oversized toroidal transformer and populated with generous, high-quality Japanese filter caps; driven by a classic complement of power MOSFETs for a detailed high end.

The CLA-100 is a miniature workhorse, delivering 100WRMS at less than 1%THD+Noise (1kHz) into 8 ohms per channel. Razor flat response of +/-0.25dB from 20Hz to 30kHz at full rated power gives the listener sonic quality equivalent to amplifiers costing several times as much.

 

CLA-200

400 WATTS OF REFERENCE-GRADE POWER.

The Avantone Pro CLA-200 Studio Reference Amplifier is a classically designed Class A/B amplifier. We took particular care to create an amplifier in the traditional studio style, with generous VU meters, high quality Japanese components and a serious toroidal transformer linear power supply. In a standard 2U rack mount chassis, this amplifier can generate over 200 watts per channel into an 8 ohm load, making it perfect for medium to large speakers in a studio environment. The CLA200 is convection cooled – no fan noise, so it can be used in the same room as the monitors.

The CLA-200 was designed to be paired with the CLA-10 studio monitors, but it can be used with just about any demanding speaker load. Very low distortion, steady performance under harsh conditions, and an open and transparent sound make this an obvious choice for discerning studios.

The Avantone Pro CLA-200 Studio Reference Amplifier is a dynamic, high output, high resolution, full-range system built the old school way. We included no-compromise components in a 2U convection cooled chassis to complement our CLA-10 Studio Reference Monitors. Of course, it can be used with any passive studio monitor requiring serious dynamic range.

CLA-400

800 WATTS OF REFERENCE-GRADE POWER.

The Avantone Pro CLA-400 Studio Reference Amplifier is a dynamic, high output, high resolution, full-range system built the old school way; a classically designed Class A/B amplifier. We took particular care to create an amplifier in the traditional studio style, with generous VU meters, high quality Japanese components and a serious toroidal transformer linear power supply. The CLA-400 implements a classic bipolar transistor design for robust bottom end.

In a standard 3U rack mount chassis, this amplifier can generate over 400 watts per channel into an 8 ohm load, making it perfect for medium to large speakers in a studio environment. The CLA-400 not only uses no-compromise components, but is also convection cooled – no fan noise, so it can be used in the same room as the monitors.

The CLA-400 was designed to be paired with the CLA-10 studio monitors, but it can be used with just about any demanding speaker load. Very low distortion, steady performance under harsh conditions, and an open and transparent sound make this an obvious choice for discerning studios requiring serious dynamic range.

 

Zero fan noise.

The CLA-200 Studio Reference Amplifier is designed to be used in a studio environment requiring high power output with no fan noise. Under testing, it delivers a powerful 208 watts into 8 ohms and can run at one third power without thermal fault. The CLA-200 has zero fan noise, as it’s convection cooled — which makes it perfectly suited for control room installation.

 

The CLA minitor family _ only from Avantone

We’ve worked tirelessly to bring this classic monitor system back to the world — but it took more than just recreating a single speaker. A tremendous amount of attention has been put into every detail: matching the original MDF and wood veneer for the cabinet, matching the original winding dimensions/value/dc resistance of the inductors, profiling the most popular amplifier pairings of the original, just to name a few things. All of this development has culminated into a slew of monitor solutions.

  • The CLA-10 and CLA-10A: the iconic “white cone” monitors, in both passive and active configurations.
  • The CLA-100 and CLA-200: reference amplifiers with the perfect voicing to compliment the CLA-10 and original “white cones.”
  • AV10 MHF and AV10 MLF: the classic “white cone” drivers — now available for the first time in decades as direct replacements for the original.
  • AV10 MXO: replacement crossover for original Yamaha™ NS10M™ studio monitors.
Specifications CLA-100

FREQUENCY RESPONSE: 20-30Khz +/- 0.25Db
OUTPUT POWER: 100W into 8Ω / 245W bridged into 8Ω
DISTORTION: 0.3% THD+N, 1Khz (1% At Rated Input)
IMPEDANCE: 20KΩ
AMPLIFIER: Class AB
DIMENSIONS: 19”w x 10.25”d x 1.75”h
WEIGHT: 14.8 lbs

Specifications CLA-200

FREQUENCY RESPONSE: 20Hz-20kHz +/- 0.5dB
OUTPUT POWER:
200W at 8 ohms
300W at 4 ohms
500W bridged into 8 ohms
DISTORTION: <0.05%
SIGNAL TO NOISE: >94dB
INPUT IMPEDANCE: (Balanced) 20KΩ (Unbalanced) 10kΩ
DAMPING FACTOR (100HZ, 8Ω): 250
SIGNAL TO NOISE RATIO (A WEIGHTED): >103DB
AMPLIFIER: CLASS AB
SLEW RATE (AT 1KHZ): 28V/US
INPUT SENSITIVITY (1KHZ): 0.775V (0DBU)
TOTAL HARMONIC DISTORTION (1KHZ): <0.1%
INTERMODULATION DISTORTION (AT 10% RATED POWER 1KHZ): <0.1%
CROSSTALK: -70DB
8Ω STEREO POWER (1KHZ): 200W
4Ω STEREO POWER (1KHZ): 300W
8Ω BRIDGE POWER (1KHZ): 500W
CABINET DIMENSIONS: 19”W X 18”D X 3.5”H 30.4 LBS
WEIGHT: 20KG (44LB)

Specifications CLA-400

8Ω STEREO POWER (1KHZ): 360W
4Ω STEREO POWER (1KHZ): 540W
8Ω BRIDGE POWER (1KHZ): 760W
SLEW RATE (AT 1KHZ): 28V/us
INPUT SENSITIVITY (1KHZ): 0.775V (0dBU)
TOTAL HARMONIC DISTORTION (1KHZ): <0.1%
INTERMODULATION DISTORTION (AT 10% RATED POWER 1KHZ): <0.1%
CROSSTALK: -70dB
FREQUENCY RESPONSE: 20Hz-20kHz +/-0.5dB
FREQUENCY RESPONSE: 20Hz-20kHz +/-0.5dB
INPUT IMPEDANCE: (Balanced) 20KΩ (Unbalanced) 10kΩ
DAMPING FACTOR(100HZ, 8Ω): 250
SIGNAL TO NOISE RATIO (A WEIGHTED): >103dB
AMPLIFIER: Class AB
DIMENSIONS: 483Wx133Hx487D (19”x5.25”x18”)
WEIGHT: 22.2kg (49lb)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.